Effects of variables related to design and production of riveted lap joints representative of longitudinal sheet connections for a pressurized transport aircraft fuselage were experimentally investigated. Specimens from an aircraft Al alloy D16Cz Alclad sheets of three different thicknesses (1.9, 1.2 and 0.8 mm) were assembled under load control using round head rivets and rivets with the compensator from a P24 Al alloy. For the joints from 1.9 mm thick sheets fatigue tests indicated a dependency of the crack initiation site and crack path on the squeeze force level and on the rivet type. At the same time, increasing the squeeze force led to improved fatigue properties of the joints, specimens assembled using the rivets with the compensator showing fatigue lives longer than joints with the round head rivets. All observed trends have been explained based on hole expansion and load transfer measurements. For thin sheets connected using the round head rivets, local deformations under the rivet driven head arising during the rivet installation promoted crack initiation and failure in the adjacent sheet. Fatigue test results indicated that the detrimental effect of this type imperfections could outweigh the benefits associated with a decrease in secondary bending due to thinning the sheets. The rivets with the compensator were observed to cause significant local imperfections beneath the manufactured head, which adversely affected the fatigue performance of the joints from thin sheets.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Fatigue crack location and fatigue life for riveted lap joints in aircraft fuselage


    Beteiligte:
    Skorupa, A. (Autor:in) / Skorupa, M. (Autor:in) / Machniewicz, T. (Autor:in) / Korbel, A. (Autor:in)


    Erscheinungsdatum :

    2014


    Format / Umfang :

    9 Seiten, 17 Quellen




    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Fretting Fatigue of Riveted Lap Joints in Aircraft Fuselage

    Zhang, Huayang / Liu, Jinxiang / Liu, Xin | AIAA | 2024


    Fatigue Crack Growth in Riveted Joints

    Fawaz, S. A. / Schijve, J. / De Koning, A. U. et al. | British Library Conference Proceedings | 1997


    Fatigue Crack Growth Predictions in Riveted Joints

    Fawaz, S. A. / Schijve, J. / United States; National Aeronautics and Space Administration et al. | British Library Conference Proceedings | 1999


    Predictions of Fatigue Crack Growth and Fatigue Life for Riveted Lap Joints

    Skorupa, Andrzej / Skorupa, Małgorzata | Springer Verlag | 2012


    Riveted Lap Joints in a Pressurized Aircraft Fuselage

    Skorupa, Andrzej / Skorupa, Małgorzata | Springer Verlag | 2012