A major concern in advancing the state-of-the-art technologies for hypersonic vehicles is the development of an earopropulsion system capable of withstanding the sustained high thermal loads expected during hypersonic flight. Three aerothermal load related concerns are the boundary layer transition from laminar to turbulent flow, articulating panel seals in high temperature environments, and strut (or cowl) leading edges with shock-on-shock interactions. A multi-disciplinary approach is required to address these technical concerns. A hydrogen/oxygen rocket engine heat source has been developed at the NASA Lewis Research Center as one element in a series of facilities at national laboratories designed to experimentally evaluate the heat transfer and structural response of the strut (or cowl) leading edge. A recent experimental program conducted in this facility is discussed and related to cooling technology capability. The specific objective of the experiment discussed is to evaluate the erosion and oxidation characteristics of a coating on a cowl leading edge (or strut leading edge) in a supersonic, high heat flux environment. Heat transfer analyses of a similar leading edge concept cooled with gaseous hydrogen is included to demonstrate the complexity of the problem resulting from plastic deformation of the structure. Macro-photographic data from a coated leading edge model show progressive degradation over several thermal cycles at aerothermal conditions representative of high Mach number flight.


    Zugriff

    Zugriff über TIB

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Hypersonic engine leading edge experiments in a high heat flux, supersonic flow environment


    Weitere Titelangaben:

    Versuche an der Eintrittskante eines Hyperschalltriebwerkes in einer Überschallströmung mit hohem Wärmefluß


    Beteiligte:
    Gladden, H.J. (Autor:in) / Melis, M.E. (Autor:in)


    Erscheinungsdatum :

    1994


    Format / Umfang :

    10 Seiten, 10 Bilder, 9 Quellen



    Medientyp :

    Aufsatz (Konferenz)


    Format :

    Print


    Sprache :

    Englisch




    Multi-Mission Codesign of a Hypersonic Vehicle Leading Edge With Heat Flux Constraints

    van der Heide, Chris / Lock, Andrew / Bone, Viv et al. | AIAA | 2025



    Blunt-leading-edge problem in hypersonic flow

    Oguchi, H. | Engineering Index Backfile | 1963



    Aerodynamic Effects and Heat Flux Augmentation of a Transpiration Cooled Hypersonic Sharp Leading Edge

    Ravichandran, Raghul / Doherty, Luke J. / McGilvray, Matthew et al. | TIBKAT | 2023