A growing need among agencies is the ability to interface soil–cement pavement layer thickness design, laboratory mixture design, and field quality control/quality assurance (QC/QA) operations. This need has existed for some time, but in recent years implementation of the Mechanistic–Empirical Pavement Design Guide (MEPDG) has reinforced the need for a more unified system for materials, design, and construction. As part of a Mississippi Department of Transportation (DOT) study, equipment referred to as the plastic mold (PM) device was developed to help meet this need. This paper’s objective is to present alternative soil–cement laboratory mixture design concepts that use the PM device to bring continuity between pavement layer thickness design, laboratory mixture design, and construction QC/QA. More than 1,100 soil–cement specimens were tested to evaluate unconfined compressive strength (UCS) development over time, wheel-tracking performance, and variability. Data presented confirmed the design cement content levels being used by the Mississippi DOT are reasonable and that the most needed advancement is interconnection of mix design with other soil–cement activities. UCS variability results revealed that the PM device and Proctor specimens have approximately the same amount of variability, and increasing the number of replicates could benefit the design procedure by increasing design reliability. Overall, the PM device has been shown to be as effective in selecting an optimum cement content as standard Proctor equipment, but the PM device has added advantages relative to interfacing with MEPDG input needs and QC/QA activities. The Mississippi DOT is evaluating the proposed mix design procedures for implementation.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Soil–Cement Laboratory Mixture Design That Interfaces with Pavement Design and Construction Quality Control


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:


    Erscheinungsdatum :

    01.01.2016




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch



    Mixture Design for Minimizing Cement Content in Pavement Concrete

    Siddiqui, M. Sarwar / Rached, Marc / Fowler, David W. | Transportation Research Record | 2014


    Laboratory investigation of soil-aggregate-cement mixture

    Luíza Rijo Valoura / Matheus Franscisco da Silva / Ana Paula Furlan | DOAJ | 2022

    Freier Zugriff

    Quality and mixture design in asphalt pavement recycling

    Adorjanyi, K. / Polish Road and Bridge Research Institute| German Road and Transportation Research Associations | British Library Conference Proceedings | 1993



    Pavement design and construction

    Tillson, George W. | Engineering Index Backfile | 1918