Cementitiously stabilized materials (cement-stabilized base–subbase, lime–fly ash stabilized subgrade, etc.) are widely used in roadway pavements by state agencies. Their use is a cost-efficient and environmentally friendly way to recycle industrial by-products. In the current Mechanistic–Empirical Pavement Design Guide developed under NCHRP Project 1-37A, cementitiously stabilized layers are assumed not to con-tribute to the total permanent deformation of the pavement. Such an assumption may lead to a design for an inadequate base thickness, especially when a thin asphalt concrete layer or pavements subject to heavy traffic loading are used. In this study, a unified permanent deformation model developed for various pavement materials was used to simulate the permanent deformation behavior of cementitiously stabilized materials in flexible pavements. The proposed model was implemented into the ABAQUS program through a UMAT subroutine. The finite element (FE) model was calibrated by analyzing the permanent deformation results from six accelerated pavement test sections. A shift factor of 1.13 was obtained to account for the condition differences between the laboratory permanent deformation test and the field. The FE model and the calibrated shift factor were then used to predict the rut depths of two selected low-volume roads. Good agreement was found between the predicted and measured data.


    Zugriff

    Download

    Verfügbarkeit in meiner Bibliothek prüfen

    Bestellung bei Subito €


    Exportieren, teilen und zitieren



    Titel :

    Finite Element Model for Rutting Prediction of Flexible Pavement with Cementitiously Stabilized Base–Subbase


    Weitere Titelangaben:

    Transportation Research Record: Journal of the Transportation Research Board


    Beteiligte:
    Wu, Zhong (Autor:in) / Chen, Xingwei (Autor:in) / Yang, Xiaoming (Autor:in) / Zhang, Zhongjie (Autor:in)


    Erscheinungsdatum :

    01.01.2011




    Medientyp :

    Aufsatz (Zeitschrift)


    Format :

    Elektronische Ressource


    Sprache :

    Englisch




    Finite-Element Model for Urban Pavement Rutting: Analysis of Pavement Rehabilitation Methods

    Ali, B. / Sadek, M. / Shahrour, I. | British Library Online Contents | 2009



    Development of Mechanistic Shrinkage Cracking Model for Cementitiously Stabilized Materials

    Wang, Jingan / Wen, Haifang / Muhunthan, Balasingam | Transportation Research Record | 2016


    Field Rutting Performance of Various Base and Subbase Materials under Two Types of Loading

    Chen, Qiming / Abu-Farsakh, Murad Y. | Transportation Research Record | 2010